News from WIRTGEN:
Precision in concrete paving with the Wirtgen slipform pavers SP 1500 and SP 1500 L

The contractor Eurovia GmbH relies on slipform pavers from Wirtgen when building, repairing and modernizing German motorways. High quality on expansion of BAB A9 in Thuringia was required.

 

The expansion of the BAB A9 between Triptis and Schleiz over a distance of some 19 km was based for the first time ever on a new model of public-private partnership, the remuneration being dependent on the quality of service provided: any defects in quality and any limitation on availability result in a reduction of the remuneration paid to the operator by the government.

Click to enlarge...

Daniel Böhnke (right), Eurovia's Senior Site Manager, and Martin Datzert, Wirtgen's Sales and Application Specialist for Slipform Pavers, discuss the job in hand on the A9 motorway in Thuringia.

It was hence of the utmost importance to the consortium tasked with the project - headed by Eurovia GmbH - to achieve the highest quality: Eurovia GmbH is responsible for the planning, construction and operation of the motorway section for the next 20 years, making it available to the German federal government.

In order to ensure a high load-bearing capacity and long service life, together with perfect surface evenness and skid resistance of the road surface over this period of time, Eurovia GmbH elected to make use of the advantages of concrete surfacing. Constructing the surface course out of washed concrete reduces traffic noise emissions by as much as minus two decibels.

Apart from being suitable for universal use, easy to process and available everywhere, concrete surfacing also offers other clear advantages: due to its high load-bearing capacity and resistance to deformation, it prevents the formation of ruts and consequently extends the necessary maintenance intervals. In view of the increasing volume of heavy goods traffic on motorways, this is a crucial factor.

Concrete paving train

Six motorway lanes extending 19 km equates to a surface area of 550 square meters or 165,000 cubic meters of concrete. Eurovia GmbH deployed a paving train comprising Wirtgen SP 1500 and SP 1500 L slipform pavers to do the job. This paving set laid down the two-layer concrete pavement in just one pass with an output of approximately 400 - 500 m per day.

Wirtgen GmbH's modern slipform paver - a paving train consisting of two pavers working independently from each other - paves the dual-layer concrete carriageway in one single pass.

Click to enlarge...

The first slipform paver was responsible for the 23-cm-thick bottom-layer concrete which was paved true to line and level by the SP 1500 L and completely compacted by an internal vibrator. Simultaneously, the SP 1500 L embedded dowels and tie bars in it, thus yielding a homogeneous base for the 7-cm-thick top-layer.

Click to enlarge...

Dual-layer concrete paving offers maximum economic efficiency for paving motorway carriageways. In this project, the Wirtgen paving train achieves an output of approximately 400 - 500 m per day.

Eurovia GmbH and Wirtgen GmbH have been close partners for many years now. Summarizing the rationale behind the decision, Site Manager Daniel Böhnke said: "The incredible reliability of the machines is a decisive factor for us. Wirtgen's application advice is outstanding. Service technicians are always available without delay in the event that a problem occurs on the job site".

Wet-in-wet paving

The top-layer concrete is installed immediately after the bottom-layer concrete, so as to ensure optimal interlocking of both layers. The concrete for the top-layer is provided via the bottom-layer concrete paver from areceiving hopper with a charging conveyor and placed in front of the second slipform paver, the SP 1500. The SP 1500 then distributes this material across the entire paving width with its spreading plough, installs the top-layer concrete "wet-in-wet" when passing over it and simultaneously compacts it. The finishing beam and super smoother produce the desired optimum surface finish: during the paving process, a finishing beam is deployed across the roadway while an oscillating super smoother operates in the direction of travel of the paver.

Surface characteristics can be successfully optimized with the help of texture curing tools such as a finishing beam and super smoother.

Click to enlarge...

The concrete pavement is additionally sprayed with a TCM 1800 curing unit across the entire working width immediately after paving. This effectively prevents rapid evaporation and the formation of cracks.